Exabyte MAGNUM 1X7 LTO AUTOLOADER, Product Manual

Page: 63 / 162

O
CTOBER
2006 M
AGNUM
1
X
7 LTO A
UTOLOADER 47
4
U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
The autoloader’s Remote Management utility allows you to set configuration
options, view autoloader information, and monitor operation across an
Ethernet network. You can access the Remote Management utility using a
standard web browser.
This chapter explains how to access the Remote Management utility and
describes the configuration options and information available through the
utility. If you plan to use the utility, refer to this chapter in conjunction with
Chapter 3 – Configuring the Autoloader .
A
CCESSING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
To access the autoloader’s Remote Management utility:
1. 1. 1. 1. Connect the autoloader to your Ethernet network as described on page 18 .
2. 2. 2. 2. If not already powered on, power on the autoloader as described on
page 19 .
3.
3. 3.
3. Use the autoloader’s operator panel to set up the Ethernet interface as
described on page 35 . Make a note of the autoloader’s IP address.
Note: If you set DHCP on, you can view the current server-assigned IP
address for the autoloader through the Status menu (see page 79 ).
4.
4. 4.
4. Launch your web browser and enter the autoloader’s IP address in the
following format:
http://
IP address
5. 5. 5. 5. Press Enter. The utility’s Home page appears. Figure 4-1 shows an example
of the Home (Status) page.