IONPURE
®
G2 DISPLAY BOARD – IP-POWERDSP-G2
IP-POWERDSP-G2MAN Rev 1
Page 6 of 25
The display board employs a 20 X 4 LCD backlit display for a clear view of data under most lighting
conditions. Parameters can be adjusted and screens can be navigated using the four membrane
switches on the front panel. Once the parameters have been configured, the setup menu may be
locked out to require a four-digit password for further modifications.
One of the two RJ-45 ports available on the back of the unit is used for connection with the G2
power controller utilizing a Cat 6 cable, Ionpure
part numbers IP-CABLE50CM-G2 or IP-
CABLE2M-G2. One display board can independently operate up to sixteen G2 power controllers
when they are linked together in a daisy chain.
No external power supply is required with the
G2 display board.
