IONPURE
®
G2 DISPLAY BOARD – IP-POWERDSP-G2
IP-POWERDSP-G2MAN Rev 1
Page 4 of 25
Disclaimer Statement
The operation and maintenance manual should provide complete and accurate information to meet
your operating and/or service requirements based on the information available at the time of
publication. The information in this manual may not cover all operating details or variations or provide
for all conditions in connection with installation, operation and maintenance. Should questions arise
which are not answered specifically in this manual, contact your equipment supplier.
Siemens reserves the right to make engineering refinements that may not be reflected in this manual.
The material in this manual is for informational purposes and is subject to change without notice.
Proprietary Rights Statement
This manual discloses information in which Siemens has proprietary rights. Neither receipt nor
possession of this manual confers or transfers any right to the client, and by its retention hereof, the
client acknowledges that it will not reproduce or cause to be reproduced, in whole or in part, any such
information except by written permission from SIEMENS. The client shall have the right to use and
disclose to its employees the information contained herein for the purpose of operating and maintaining
the SIEMENS equipment, and for no other purpose.
In the event the content of this manual is altered or section/items are omitted during reproduction, in
whole or in part, and instructions or definitions within the reproduction result in personal injury to those
who follow the altered instructions, the burden of responsibility for personal injury falls solely on the
party who effects the reproduction.
Manual Revision History
Event
Date
Description
Original Publication
Rev 0
September 2011
Original publication
Rev 1
November 2011
Updated remarks on firmware in sections 3.2 and 5
Updated Figure 23
