background image

EVO42

3

www.evolutionsteel.com

IMPORTANT INFORMATION

Please read these operating and safety 
instructions carefully and completely. 

For your own safety, if you are uncertain about 
any aspect of using this equipment please access 
the relevant Technical Helpline, the number of 
which can be found on the Evolution Power 
Tools website. We operate several Helplines 
throughout our worldwide organization, but 
Technical help is also available from your supplier. 

WEB    

www.evolutionpowertools.com/register

Congratulations on your purchase of an 
Evolution Power Tools Machine. Please 
complete your product registration ‘online’ 
as explained in the A5 online guarantee 
registration leaflet included with this 
machine. You can also scan the QR code 
found on the A5 leaflet with a Smart 
Phone. This will enable you to validate your 
machine’s guarantee period via Evolutions 
website by entering your details and thus 
ensure prompt service if ever needed. We 
sincerely thank you for selecting a product 
from Evolution Power Tools.

EVOLUTION LIMITED GUARANTEE.

Evolution Power Tools reserves the right to 
make improvements and modifications to the 
product design without prior notice.

Please refer to the guarantee registration leaflet 
and/or the packaging for details of the terms
and conditions of the guarantee.

Evolution Power Tools will, within the guarantee
period, and from the original date of purchase,
repair or replace any goods found to be defective
in materials or workmanship. This guarantee is
void if the tool being returned has been used
beyond the recommendations in the Instruction
Manual or if the machine has been damaged
by accident, neglect, or improper service. This
guarantee does not apply to machines and
/ or components which have been altered,
changed, or modified in any way, or subjected
to use beyond recommended capacities and
specifications. Electrical components are subject

to respective manufacturers’ warranties. All
goods returned defective shall be returned
prepaid freight to Evolution Power Tools.
Evolution Power Tools reserves the right to
optionally repair or replace it with the same or
equivalent item. There is no warranty – written
or verbal – for consumable accessories such as
(following list not exhaustive) blades, cutters,
drills, chisels or paddles etc. In no event shall
Evolution Power Tools be liable for loss or
damage resulting directly or indirectly from
the use of our merchandise or from any other
cause. Evolution Power Tools is not liable for any
costs incurred on such goods or consequential
damages. No officer, employee or agent of
Evolution Power Tools is authorized to make oral
representations of fitness or to waive any of the
foregoing terms of sale and none shall be 
binding on Evolution Power Tools.

Questions relating to this limited guarantee
should be directed to the company’s head
office, or call the appropriate Helpline number.

SAFETY FIRST

Before attempting to operate this power tool, 
the following basic safety precautions should 
always be taken to reduce the risk of fire, 
electric shock and personal injury:

•  Read the Instruction Manual to understand the 

safety instructions, application, limitation and 
potential hazards associated with this power 
tool.

•  Only use genuine Evolution replacement 

parts. The use of unauthorised parts may be 
dangerous and could result in damage to the 
machine and / or injury to the operator.

 

Summary of Contents for EVO42

























Reviews: