Customer Service 1•800•787•6649
41
Control Pack Codes
Code
Description
Action required
Error code indicating the temperature sensors are out of
balance. If code is flashing intermittently with the temperature
of the spa it may be a temporary issue. If the code is displayed
solid and by itself, the spa is shut down.
Refer to the spa failing to heat section
of the troubleshooting guide.
Error code indicating the sanitizer of the spa is too high.
Test/adjust sanitizer levels
Error code indicating the sanitizer of the spa is too
low.
Test/adjust sanitizer levels
Indicates standby mode has been activated.
Press any button other than jets 1 to
resume normal operation.
Indicates the spa is in "standard in economy mode". During this
time the spa acts as if it is in standard mode. After one hour the
spa will revert to economy mode.
After one hour the spa will revert to
economy mode.
Indicates the spa is in sleep mode.
Refer to the topside control section
of manual to change modes.
Indicates the spa is in standard mode.
Refer to the topside control section
of manual to change modes.
Error code indicating that there appears to be a pump that is
stuck on. This may cause the temperature of the spa to rise to
unsafe conditions.
DO NOT ENTER WATER!!Remove
cover and allow spa to cool. If issue
persists contact dealer, service
technician, or customer service.
Customer Service 1•800•787•6649
41
