1
8
Jets 1
Touch the “Jets 1” button once to turn pump 1 on
or off, and to shift between low and high speeds. If
left running, the low speed of the pump will auto-
matically turn off after 2 hours, and the high speed
will automatically turn off after 15 minutes.
Jets 2
Touch the “Jets 2” button once to turn pump 2 on
or off and to shift between low and high speeds. If
left running, pump 2 will automatically turn off after
15 minutes.
Option
/Boost
(if equipped)
This button is used to turn on the blower/pump in 3
pump spas. This is 1-speed only and will turn off au-
tomatically after 15 minutes.
Two-Pump Spas, Two-Pump +
Blower Spas, and Three-Pump
+ Blower Spas (6-8 button
rectangle topside
)
Jets 1
Press the “Jets 1” button once to turn pump 1 on or
off, and to shift between low and high speeds if
equipped. If left running, the pump will turn off after
a timeout period. The pump 1 low speed timeout on
some systems may be as long as 4 hours.
On non-circ systems, the low speed of pump 1 runs
when the blower or any other pump is on. It may
also activate for at least 1 minute every 30 minutes
to detect the spa temperature (polling) and then to
heat to the set temperature if needed, depending
upon mode. When the low speed turns on automat-
ically, it cannot be deactivated from the panel; how-
ever, the high speed may be started.
Jets 2
Press the “Jets 2” button once to turn pump 2 on or
off. If left running, the pump will turn off after a
timeout period.
Jets 3
(optional on some systems)
Press the “Jets 3” button once to turn pump 3 on or
off. If left running, the pump will turn off after a
timeout period.
Blower
/Boost
(optional on some systems)
1-speed operation: on/off; If left on, the blower will
automatically turn off after a timeout period.
Warm/Cool
To display the Set Temperature, press either the
“WARM” or “COOL” button once. The LCD will
begin to flash the set temperature. If you want to
increase or decrease the desired temperature, press
the “WARM” or “COOL” button accordingly.
Once at the desired temperature, allow a few
seconds for the flashing to cease. Your Set
Temperature has now been successfully set.
Operate Your Spa
Two-Pump Spas and Two-Pump +
Blower Spas
(7 button oval topside)
Warm
/C
ool
To display the Set Temperature, press either the
“WARM” or “COOL” button once. The LCD will
begin to flash the set temperature. If you want to
increase or decrease the desired temperature, press
the “WARM” or “COOL” button accordingly. Once
at the desired temperature, allow a few seconds for
the flashing to cease. Your Set Temperature has now
been successfully set.
MODE CHANGE
To change the mode on the spa, press WARM
followed by MODE.