EVOC LNB-1406, Manual

Page: 103 / 148

Chapter 3 Installation
JNB-1406 - 23 -
Expand the Memory
1. Loosen the screws on the memory
cover and remove it.
2. Loosen the locks beside the memory;
take the memory module out.
3. Aim the gap of the memory bank
(DDR3 1066/1333MHz, up to 8G) to
be replaced at the corresponding
bulge of the memory socket; then
insert the memory bank into its
socket in an angle of 45 degree; press
down the memory bank towards the
motherboard until it is well fixed.
4. Put on the memory cover, lock with
corresponding screws.