TSMIP-10GE Series
IP Transport Stream Monitor
Revision 1.0
Page-25
4.3.4. DPI Monitor
Figure 4-17 : VistaLINK
®
PRO Input Configuration - DPI Monitor Tab
DPI Monitoring
DPI Monitoring:
This field allows the user to enable or disable all DPI monitoring. It is a global
enable/disable for all DPI traps.
DPI Timeout Period (0-1440 minutes):
This field sets the duration of the DPI inactivity timeout in
minutes. If the period set on the slider is exceeded between DPI pid arrivals, a DPI timeout trap is
triggered.
DPI Trap Enable
DPI Timeout:
This control allows the user to enable/disable the DPI Timeout SNMP trap.
DPI Message:
this control allows the user to enable/disable the DPI Message SNMP trap.
DPI Syntax:
This control allows the user to enable/disable the DPI Syntax SNMP trap.
DPI Trap Status
DPI Timeout:
This field indicates whether the specified timer runs out before the program receives a new
DPI message since the last DPI message was received. If the DPI inactivity Timeout setting is met before
the next DPI packet arrives, a trap will be sent. This is only the status and this parameter wouldn’t send
any trap.
DPI message:
This field indicates whether the stream has received a DPI PID. This parameter will send a
trap every time a DPI message is received on the input. This is only the status; this parameter wouldn’t
send any trap.
DPI Syntax:
This field indicates whether the received DPI message has a syntax error. A trap will be sent
if there is any issue with the structure of a DPI packet in the stream. This is only the status; this parameter
wouldn’t send any trap.
