TSMIP-10GE Series
IP Transport Stream Monitor
Page-30
Revision 1.0
RRT Repetition:
Rating region Table. Defines a rating system for a given region characterized by a
number of rating dimensions, each of which is composed of two or more rating levels. This test checks
that the rating Region table repetition rates do not exceed 60,000 ms.
STT Repetition:
System Time Table. Provides a reference for the time-of-day to receivers. This test
checks that the System Time table repetition rates do not exceed 1000ms.
More information can be found at:
ETSI TR 101 290 test Conditions:
The status LED located to the left of each test will highlight, when in Auto-refresh the dynamic status of the
stream.
For the majority of the ETSI TR 101 290 test, it is possible to configure custom configurations to ensure
that particular alarms and conditions are fed back to the operator. It is important to select the Monitor
Enable Check box (to enable custom monitoring parameters to be invoked), select the desired alarm
Severity and then configure the test Threshold.
Note: Syntax Errors P1, P2 & P3 are measured in ms. PCR errors are measured in
ns.
TR 101 290 DVB REFERENCE VALUES:
Test
DVB
TS_Sync_Loss
Sync_byte_error
PAT_error
500ms
Continuity_count_error
PMT_error
500
PID_error
500
Transport_error
CRC_error
PCR_repetition_error
40ms
PCR_error
100ms
PTS_error
700ms
CAT_error
Table 4-2 : TR 101 290 DVB Reference values
