TSMIP-10GE Series
IP Transport Stream Monitor
Page-18
Revision 1.0
Figure 4-10 : VistaLINK
®
PRO General Configuration – General
Mapping Table Columns
Input:
Displays the
index number of each IP input.
Status:
This field indicates the status of input.
IP:
Control to set the Source IP address (Multicast/Unicast) of each IP input.
Port:
Control to set the Transport Protocol port of each IP input.
Ethernet Port:
Control to select the DATA GigE for each IP input.
Enable:
Control to Enable/Disable each IP input.
Bitrate:
Displays the bitrate value (Mbit/s) of the monitored MPEG-2 TS.
Configuration:
By clicking the Configuration button, the user can make TSM Input configurations as is
explained in 4.3.
Sync
By clicking Sync button on the top of
IP
,
Port
,
Ethernet Port
and
Enable
columns, the information in the
first field will be copied to the rest of the column. This facilitates lesser manual entries. Increment option is
also available for IP and Port columns where in upon sync, the IP address and ports could be
automatically synced incremented based on the first value (Figure 4-11).
Figure 4-11 : VistaLINK
®
PRO General Configuration – Sync Option