5782DEC
Professional H.264 and MPEG-2 Decoder
VLPRO INTERFACE
Revision 1.0
Page - 23
Input Bit Error:
Input bit error detection. The alarm is triggered when enabled and there is an error in
the input bits.
SCTE35 Data Present:
SCTE35 Data present monitoring. The alarm is triggered when enabled and
the SCTE35 data is no longer present.
SCTE104 Data Inserted
: SCTE104 Data insertion monitoring. The alarm is trigged when SCTE35
trigger is translated and inserted as SCTE104 on the decoder output.
Video Timestamp Error:
This parameter provides the status of the video link. The alarm is triggered
when enabled and there is a video timestamp error. This fault is used as an engineering reference tool.
Audio Timestamp Error:
The audio timestamp errors provide the status of the audio link. The alarm is
triggered when enabled and there is an audio timestamp error. This fault is used as an engineering
reference tool.
Memory Self Test:
The Fault Present monitor displays the fault condition of the memory self test.
Green indicates healthy while red indicates a fault. Enabling the Send Trap control sends out a trap if
there is a fault generated by the memory self test.
4.10. SFP-ASI TRANSMIT
Figure 4-11: VistaLINK
®
– SFP-ASI Transmit Tab
SFP Transmit Output:
This parameter allows the user to set the mode of the SFP transmit feature, to
enable or disable transmitting on a specific output.
SFP Output IP Address:
This parameter allows the user to set the output IP address of the SFP
transmit stream if SFP Transmit is enabled.
SFP Output IP Port:
This parameter allows the user to set the output IP port number of the SFP
transmit stream if SFP Transmit is enabled.
PID Filter:
This parameter allows the user to enable PID filtering for the SFP transmit output stream.
