5782DEC
Professional H.264 and MPEG-2 Decoder
VLPRO INTERFACE
Revision 1.0
Page - 21
WST/WSS/OP47 Controls
OP47 Insert Line:
This parameter allows the user to select the OP47 insertion lines for ANC
services.
OP47 Embed Enable:
This parameter allows the user to enable the embedding of OP47 in the
output.
WST Embed:
This parameter allows the user to enable the embedding of World Standard Teletext in
the output SDI.
WSS Embed:
This parameter allows the user to enable the embedding of WSS in the output SDI.
WSS Embed Mode:
This parameter allows the user to select the embedding mode for WSS.
The
two options available include AR mode and PID mode. If the user selects AR mode, WSS is
generated based on the video display aspect ratio extracted from the elementary stream. If the user
selects PID mode, WSS is generated using the data extracted per ETSI EN472 and EN775. Data is
carried in separate PID.
Timecode Controls
Timecode SD Embed Mode:
This parameter allows the user to select if SD VITC timecode is
embedded in the output SDI or if ATC timecode is embedded in the output SDI.
Timecode SD VITC Insert:
This parameter allows the user to select the insertion lines for the SD
VITC Time Code data.
Timecode Embed Enable:
This parameter allows the user to enable the embedding of Time Code.
4.8.
ANC MONITOR
Figure 4-9: VistaLINK
®
– ANC Monitor Tab
