Model 5010 Time Code Master Manual
OPERATING INSTRUCTIONS
Revision 3.1.1
Page 4-35
4.8.1. Selecting the Video Standard
The
VIDEO TYPE
menu item is used to select the video standard of the program video. Changing the
video standard will affect the settings of the VITC LINE RANGE menu setting. Make sure that you re-
check this setting when you change the video standard.
Select
AUTO
if you want the 5010 to auto-detect the video standard.
Select
NTSC
if you are using NTSC video.
Select
PAL
if you are using PAL video.
4.8.2. Adjusting the Horizontal Character Size
The
HORZ CHAR SIZE
menu item is used to adjust the character width. Use the
Í
and
Î
keys to
adjust the right side of the raster.
4.8.3. Adjusting the Front Panel Display Brightness
The
DISPLAY LEVEL
menu item is used to adjust brightness of the front panel display. Use the
Ï
and
Ð
keys to adjust.
4.8.4. Adjusting the LTC Generator Output Level
The
LTC OUT LEVEL
menu item is used to adjust the LTC generator output levels. Use the
Ï
OR
Ð
keys to change the level
.
The recommended output level setting is 35, which is approximately 1 volt
peak to peak.
VIDEO TYPE
AUTO
NTSC
PAL
HORZ CHAR SIZE
HORIZONTAL
CHAR SIZE = 10
Í
Î
TO ADJUST
DISPLAY LEVEL
DISPLAY LEVEL = 2
Ï
Ð
TO ADJUST
LTC OUT LEVEL
LEVEL = 35
Ï
Ð
TO ADJUST
