38
ENGLISH
To prevent potential negative consequences for the environment and human health, make sure that
this product is properly disposed of and recycled.
For more information regarding the disposal and recycling of this product, please contact your
Distributor, after sale Service, or waste treatment Service.
CHAPTER 17 TRANSPORT AND HANDLING
The transport and handling of the blast chiller must only be done while maintaining the vertical
position, observing the markings on the packaging.
The manufacturer disclaims any liability for problems resulting from transport performed
under conditions other than those specified above
.
The accessories of the blast chiller (guides, grilles, trays, remote condensing unit with pipes) are
packaged separately and placed inside the unit.
The blast chiller is mounted on a wooden base with screws and packaged with polyethylene, carton,
crate or boxes.
Regarding the disposal of the packaging it is necessary to refer to current regulations in your country.
The movement of the blast chiller shall be performed using a fork lift or pallet trucks equipped
with suitable forks (length of at least 2/3 of the unit).
The dimensions and masses of the refrigerated cabinets packed are shown in Table 1.
The limits of stackability and the centre of gravity are indicated on the label of the package.
14.1 Positioning operations
Since the incorrect positioning of the blast chiller can cause damage to the same, jeopardizing its proper
functioning and result in risk to the personnel, the installer must adhere to the following general rules:
- position the remote unit as described in the installation manual
- position the blast chiller keeping a minimum distance of 3 cm from any wall
- the environment must be sufficiently ventilated
- position the blast chiller away from heat sources
- avoid exposure to direct sunlight
- remove the polyethylene, cardboard or wood packaging
Polyethylene is dangerous for children
- remove any accessories with external connections
