22
ENGLISH
►
Make sure the display is in the “ON” mode.
►
Make sure the keyboard is not locked and no procedu-
re is currently under process.
► Press and release the
(1) key, press and rele-
ase
(2) key, then press and release
(3) key : in
oder the icon
“core probe” disappears.
The display will show the end-of-freezing temperature and the running temperature during the
freezing process
►
Press and release the MENU key, then press and release the
key or the
key, key to
select the end-of-freezing temperature and the operating setpoint during the freezing process,
other than the set ones.
►
Press and release the key
or the key
to modify these values, then the ESC key to store
them;
Program: MANUAL
Elapsed time: 0 min
►
Press and release the START / STOP key (1): the test
to verify if the core probe has been inserted properly will
start; see paragraph “Test for checking the core probe
proper insertion”.
►
If the test is completely successful, the cycle starts.
►
If the test is not successfully completed the buzzer
will sound for 5 seconds every 60 seconds and a time
cycle will start; see paragraph “Time soft freezing and
preservation”.
►
During the freezing soft phase the display will show
the temperature taken by the core probe, the cell tem-
perature, the name of the program (if any) and the time
elapsed since the starting of the freezing process
.
►
Hold the START/STOP key pressed for 3 seconds to stop the cycle.
►
When the temperature taken by the core probe reaches the end-of-soft-freezing phase, the
control panel will automatically switch to the freezing phase.
►
During the freezing phase the display will show the temperature taken by the core probe, the
cell temperature, the name of the program (if any) and the time elapsed since the starting of the
freezing process.
►
If the temperature taken by the core probe reaches the end-of-freezing temperature within the
freezing phase time limit , the freezing will be successfully completed, the control panel will auto-
matically switch to the preservation phase and the buzzer will sound.
►
To silence buzzer press and release any key.
