manualshive.com logo in svg

Everlasting KING TROLLEY 120 L, Use And Maintenance Manual

Share
Download
Everlasting KING TROLLEY 120 L Use And Maintenance Manual Download Page 15

14

ENGLISH

► 

If the temperature taken by the core probe reaches the end-of-cooling temperature within the coo-

ling phase time limit , the cooling will be successfully completed, the control panel will automatically 

switch to the preservation phase and the buzzer will sound. 

To silence buzzer press and release any key. 

Program: MANUAL

Cycle time: 70 min

End

► 

During the preservation phase the display will show 

the cell temperature, the name of the program (if any) 

and the time taken to complete the cooling phase suc-

cessfully. 

► 

If the temperature taken by the core probe does not reach the end-of-cooling temperature within 

the cooling phase time limit, the cooling process will not be successfully completed but it will go on 

working and the buzzer will sound. 

► 

To restore the normal display and to silence buzzer press and release any key. 

Program: MANUAL

Cycle time: 100 min

End

► 

When the temperature taken by the core probe rea-

ches the end-of-cooling temperature , the control panel 

will automatically switch to the preservation phase as 

stated above.   

Summary of Contents for KING TROLLEY 120 L

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands