PARAGON960 x4 32CH
20
2.3
Basic Connection
The instructions below the figure describe the basic connection for the PARAGON960 x4 32CH.
Web Remote
Client
PowerVideo
Plus
(CMS)
Main Monitor
(VGA)
Main Monitor
(HDMI)
Call Monitor
(BNC)
Line Level
Audio Out
Line Level
Audio In 1~16
Analog Camera 1~32
Power Supply
Mouse
2
5
3
7
4
6
1
Front View
Rear View
Network
Audio Cable
Figure 2-29
1.
Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control keys on the front panel.
2.
Using the supplied Power Cord, connect one end to the
100-240 VAC~
port on the DVR and
the other end to the
100-240 VAC~
power outlet, and then turn on the power switch.
Note:
Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
3.
Connect the cameras to the DVR using the coaxial cables. 700TVL cameras are recommended.
4.
To view videos, connect a monitor to the HDMI, VGA or BNC port using the HDMI, VGA or
BNC cable supplied by the monitor manufacturer.
5.
Use a standard RJ-45 cable to connect the DVR to the network for using EverFocus’ CMS.
6.
To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note that
the speaker with a (built-in) amplifier and external power is required.
7.
Connect the line level audio input devices (microphones) to the Audio-in of the DVR using the
supplied Audio Cable. Note that the microphone with a (built-in) amplifier and external
power supply is required.