EverFocus Paragon960 User Manual Download Page 48

Page: 48 / 171

PARAGON960 x4 32CH

3.2.4

Field Input Options

You may found the following fields in the Configuration menu. Follow the instructions below
to configure the settings.

Text Box:

Press the

Enter

button and an on-screen keyboard will appear.

On-Screen Keyboard:

Turn the Jog / Shuttle wheel to highlight each character and then press

the

Enter

button to input the selected characters. After inputting the characters, highlight

Enter

on the On-Screen Keyboard, and then press the

Enter

button to confirm.

Caps

Switch to capital letters

←

Delete the letter backwards

Confirm the selection

Move to left

Move to right

Space

Enter a space

Drop-Down Box:

Press the

Enter

button to see all selections, turn the Jog / Shuttle wheel to

highlight the desired option, and then press the

Enter

button again to select it.

Check Box:

Press the

Enter

button to enable it (checked) or disable it (unchecked).

Button:

Press the

Enter

button to execute the function.

Bar:

Press the

Enter

button to activate the slider, turn the Jog / Shuttle wheel to adjust the

setting, and then press the

Enter

button again to finalize the changes.

Summary of Contents for Paragon960












































































































































































Search results

Summary of Contents for Paragon960

Reviews:

EverFocus Paragon960, User Manual, Page: 48 / 171

Search results

Summary of Contents for Paragon960

Reviews: