Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
59
To configure the Line-Crossing Detection function:
1.
Select
1
from the
Rule Number
drop-down list to configure the first line. Up to 4 lines can be configured.
2.
Enable the
Rule Switch
and then define a
Rule Type
:
A
B: Detects movement from A to B.
B
A: Detects movement from B to A.
A
B: Detects both movements from A to B and from B to A.
3.
To draw a line:
a.
Use your mouse to click 2 points to draw a line.
b.
If you want to move the line to other position or re-draw the line, select the line by checking the red
box on the upper-side of the line, the line will change to red color. Drag and drop the line to a desired
position. Drag the red dots of the line can re-size the line.
1
c.
Click the
Apply
button to save the settings.
d.
You can follow the steps above to configure more lines. Up to 4 lines can be configured.
e.
You can click the
Clean All
button to remove all the lines. To remove a certain line, select the line by
checking the red box on the upper-left corner of the line, and then click the
Clear
button.
Note:
The configured lines should not be too short in order to enhance the detection rate.
