Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
65
Enable Recording:
Switch the button to the right to enable the Face Detection recording function. Note that for
Face Detection recording function to work, the Record Schedule function has to be configured (please refer to
5.8.1 Record Schedule
).
Click
Refresh
to refresh the page; click
Apply
to save the settings.
To configure the Face Detection function:
1.
Select
1
from the
Rule Number
drop-down list to configure the first area.
2.
Enable the
Rule Switch
and then define a
Rule Kind
and
Rule Type
.
3.
To draw an area:
a.
To draw an area, use your mouse to click 4 points to draw a rectangle shape. The shape should be
convex. Concave shape is not allowed. To draw a line, use your mouse to click 2 points to draw a line.
b.
If you want to move the area (or line) to other position or re-size the area, select the area by
checking the red box on the upper-left corner of the area, the borders of the area will change to red
color. Drag and drop the area to a desired position. Drag the red dots at the edge of the area can
re-size the area.
1: Foreign & Missing
c.
Click the
Apply
button to save the settings.
d.
You can click the
Clean All
button to remove the area.
Note:
The configured areas should not be too narrow or small in order to enhance the
detection rate.
