Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
21
Hallway Mode:
Switch the button to the right to enable the Hallway Mode function. This function allows users
to monitor vertically-oriented areas such as hallway, corridors and aisles. Please refer to
5.2.2.1 Hallway Display
for more details.
Rotate:
Select 0 to rotate the camera view by 0 degree; select 180 to rotate the camera view by 180 degree.
BLC:
Switch the button to the right to enable the BLC (Backlight Compensation) function.
BLC Level:
Adjust the level for the BLC function.
BLC Area:
Select an area to apply the BLC function.
3D Noise Reduction:
Select Auto to
•
Auto:
Select Auto for the camera to automatically turn on the 3DNR function.
•
Manual:
Select to turn on the 3DNR function based on the setup
Level
.
•
Disable:
Select to disable the 3DNR function.
DWDR:
Switch the button to the right to enable the DWDR function and then you will have to adjust a
Level
for
the DWDR function.
AGC:
If you select
Manual
in the Shutter field, set up the AGC for the camera. The lower the AGC level, the
lower the video signal and the noise.
White Balance:
•
Auto:
Select for the camera to automatically adjust the white balance.
•
Manual:
Select to adjust the Red, Green, Blue values yourself.
•
Indoor:
Select Indoor if your camera is installed in an indoor environment.
Shutter:
•
Auto:
Select for the camera to automatically adjust the Shutter.
•
Manual:
Select to manually adjust the shutter speed. Select a speed in the
Time Exposure
field. Also set
up the
AGC
in the AGC field above.
Time Exposure:
If you select
Auto
in the Shutter field, the camera will automatically apply a max. shutter speed.
If you select
Manual
in the Shutter field, select a shutter speed from the drop-down list.
Defog Mode:
•
Auto:
Select Auto for the camera to automatically turn on the Defog function.
•
Manual:
Select to turn on the Defog function based on the setup Level.
•
Disable:
Select to disable the Defog function.
Click
Refresh
to refresh the page; click
Apply
to save the settings; click
Default
to restore to the default settings.
