Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
62
5.8.2.4
Pedestrian Detection
Only 5MP and 8MP models support this function. When IP Camera detects pedestrian in a pre-defined area,
the Pedestrian Detection event will be triggered. You can configure some event actions like event recording,
alarm output or Email alert when an event is triggered.
Face Detection
Cross Counting
Perimeter Intrusion
Line-Crossing
Object Detection
Pedestrian Detection
Analysis
Level
Middle
Normal
Pedestrian Detection
Switch:
Switch the button to the right to enable the function.
Timeout Duration:
After enabling the Alarm Out, select a timeout duration for the alarm output.
Post Recording:
Select a post recording time when a Pedestrian Detection event is triggered.
Level:
Select a detection level for the Pedestrian Detection. The value stands for the distance of the objects.
Smaller value is suitable to detect objects that are far away from the camera. Larger value is suitable to detect
objects near the camera. The red squares on the top left corner represent the max. and min. object size of the
selected Level.
Scene:
Select
Indoor
or
Outdoor
based on the location where your IP camera is installed.
Alarm Out:
Switch the button to the right to enable the alarm output, and then further configure the
Timeout
Duration
above.
Send Email:
Switch the button to the right to enable the Email alert function. When a Pedestrian Detection
event is triggered, the camera will send an email alert with a snapshot image to the pre-configured Email
receiver. Note that for this function to work, you have to set up the Email function in advance (refer to
5
.
5.3
).
Rule Number:
Select a number to configure the areas.
Rule Switch:
Switch the button to the right to enable the Rule Type setup below.
Rule Type:
Select a rule type.
Enable Recording:
Switch the button to the right to enable the Pedestrian Detection recording function. Note
that for Pedestrian Detection recording function to work, the Record Schedule function has to be configured
(please refer to
5.8.1 Record Schedule
).
