Eventide Eclipse User Manual Download Page 9

Page: 9 / 68

Eclipse User Manual

Release 4.0.1

Page 7 of 66

Eclipse User Manual



All of the levels and signal selection

outside

the DSP are addressed in the

LEVELS

area and the

SETUP

area. Refer to the “Eclipse System Signal Flow” sheet provided in the pocket of this manual to “look”
at the signal flow

outside

the DSP. You

cannot

save these settings as parts of programs.



All of the routing and levels

inside

the DSP are addressed in the

PARAMETER

area. Refer to the “Pro-

gram Signal Flow” sheet provided in the pocket of this manual to “look” at the signal flow

inside

the

DSP. All of these settings

are

saved as parts of programs.

This is as confusing as it gets, so if you have this straight you’re all set.

Knobs, Keys, and Jacks

... certified ergonomically sound after extensive testing on free-range humans.

The Front Panel

POWER

Toggle this toggle to “1” to turn the Eclipse on. Toggle this toggle to “0” to turn the
Eclipse off.

PROGRAM

Press this key to load and save programs.



see page 28

HOT KEYS

Press this key to access the most important parameters for the current program. Addition-
ally, assign any parameter to the

HOT KEYS

area for quick access.



see page 33

LEVELS

Press this key to alter input and output levels, system wet/dry mix, system routing (not to
be confused with the routing between the two effects blocks that comprise a program), and
metering parameters.



see page 21

SETUP

Press this key to access system parameters such as display, digital rate and clock source,
MIDI configuration, and much more.

6) Display

This is your window on the inner workings of the Eclipse.

7) Soft Keys Each of the four soft keys corresponds to the bracketed phrase in the display directly above

it. Pressing a soft key allows the parameters associated with that soft key to be altered.

8) Keypad

The keypad is used to enter parameter values. Negative values can be entered by pressing
the

+/-

key before or after the number. Numbers entered will not “stick” until you press the

ENT

key. Use the increment or decrement keys (the little triangles) to change parameter

values by small, sensible amounts.

Summary of Contents for Eclipse





































































Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands

Eventide Eclipse, User Manual

Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands