Eventide Eclipse, User Manual

Page: 20 / 68

Eclipse User Manual
Eclipse User Manual Page 18 of 66 Release 4.0.1
Finally, let’s assign the modulation block’s LFO to a parameter. Press
PARAMETER
page 2
<EDIT MOD> LFO#1
, and set
(T_RATE)
to
whole
note
. Now the modulation block’s LFO is cycling once a measure. Use
the
^-BACK
soft key to “jump up” a level.
 see page 43 for information on the modula-
tion block LFO and all of the other wonderful modulators!
All of the modulators in the modulation block exist independently of
programs. To prove it, load the program
CombDelays
. Should you peek
back at the LFO’s
(T_RATE)
, you’ll find it hasn’t changed.
Now go to the
HOT KEYS
area and set
(M_COMB)
to
0 %
.
To assign the modulation block’s LFO to this parameter, hold down its
soft key until the page shown to the right appears.
Select
<MODULATE>
and then set
(SOURCE)
to
LFO#1
. Trippy!
You can change the depth of the effect with
(SCALE)
.
To disconnect modulation, simply set
(SOURCE)
back to
off
.
 see page 40
for more information about patching parameters to the modulation block