Eventide Eclipse User Manual Download

Page: 56 / 68

Eclipse User Manual

Eclipse User Manual

Page 54 of 66

Release 4.0.1

If the Eclipse

still

won’t fly straight, power down and then power back

up while holding down the

key. After a few seconds, the Eclipse will

ask if you want to clear internal memory.

Select

<YES>

, but consider yourself warned:

doing so will erase every program between 0 and 99 and change

all of the

SETUP

and

LEVELS

area parameters back to their factory defaults

. As dramatic as this is, it will

probably solve your problem.

Still having problems? Try reinstalling the operating system as described in the Updating Software sec-
tion below.

No luck? Your system may have a hardware problem and you should contact Eventide or your dealer for
servicing.

Formatting Memory Cards

If you are worried about the contents of the Memory card, you should either dump the contents of the
memory card to an external storage device

(see page 51)

copy all valuable internal programs to a different

Memory Card, copy the faulty Memory Card’s programs to internal memory and then to another Memory
card

(see page 32)

. You can also do this with a PC equipped with a suitable CompactFlash card reader.

Once you’re

sure

that there is

nothing

worthwhile on the card that isn’t

saved somewhere else, press

SETUP

page 3

UTILITY

Be advised: doing so will wipe out everything on the card.

You might also put a label on the card (using adhesive tape, indelible marker, etc.) indicating that a prob-
lem occurred along with the date. Keep track of this kind of problem and make multiple backup copies.

Summary of Contents for Eclipse





































































Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands

Eventide Eclipse, User Manual

Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands