Evend SOLID AS 6x10, Service Manual

Page: 19 / 41

Information
VENDING MACHINE
17
2. Pull the motor from the
support bulkhead.
3. The end of
dismantlement. Pull the
spring from the spring
fixture.
The assembly
procedure should be
performed in the
reverse sequence.
1.11. Payment device
The automatic machines SOLID in SILVER version are not equipped
with the payment device. The installation is performed by the customer
individually. Payment device installation
– in the control panel remove cap
(see section 1.4.) by unscrewing the 4 nuts and then screwing frame PD (Fig.
14).
Fig.14 Frame PD
1.12. Maintenance and cleaning operations. Hygiene
All elements are high quality powder coated. This facilitates cleanness maintenance inside of
the machine. Clean with a damp cloth. The producer shall not be liable for any defects resulting
from cleaning with the aggressive chemical agents.
The refrigerating unit filter and the unit shall be periodically cleaned (every 60 days). In
order to perform the unit filter cleaning, the front masking frame should be disassembled (see
chapter 1.4). For the refrigerating unit maintenance and cleaning operation, dismantlement