Evend SOLID AS 6x10, Service Manual

Page: 26 / 41

Main board./Automatic machine configuration
VENDING MACHINE
24
➢
Temperature display - option on/off. When activated the temperature inside the
machine values will be displayed.
➢
Photocell
•
Calibration - submenu enabling verification of the photocell diodes proper
operation.
•
On
– pressing „#” key will switch on the photocell.
•
Off-
pressing „#” key will switch off the photocell.
•
Parameters preview. Displays the photocell calibration parameters.
•
Tightening on. Pressing „#” key activates the spring tightening function. It
involves the
spring tightening by 30° in the case the photocell cannot detect the
product. The tightening can be performed three times, if the photocell still cannot
detect the product, the motor will be blocked and error xxx-004
•
will be displayed (see Chapter 2.3.6)
•
Tightening off. Pressing „#” key deactivates the spring tightening function.
•
Auto test on. Pressing „#” key activates the photocell auto test function. The
function relates to the case when the photocell error message appears during
calibration (the machine is out of order). The auto test is the automatical
verification if the photocell is still unable to perform the proper calibration. If the
calibration is performed properly, the automatic vending machine will restart the
regular sell.
•
Auto test off.
Pressing „#” key will deactivate the auto test function.
➢
Language. Enables the language change. Polish and English languages can be
selected.
➢
Energy saving
– it is possible to set the time, after which the machine lighting will
operate with 50% of intensity.
➢
Automatic machine number. The main board has a unique number assigned for
identification purposes.
➢
Service auto-reset. Enables the time setting, after which the service mode (idle
condition) will be returned to the sell mode.
➢
Factory settings. Activation will result in the machine return to the factory settings.
The “
Factory settings restored
” message will be displayed. It will cause the deletion of
statistics, prices for the positions and return to the standard coin inlet settings. For
restart of the motors the
Motor auto-test
should be performed.
2.3.4. Payment settings
For that menu the following options can be selected („#” key):
➢
Coin intake settings. On/off options.
•
On
•
Off
•
Tube supplementation. The function enables the coin intake supplementation
with the coins.
➢
Banknotes accepter settings. On/off options.
➢
Maximal debt. The function enables setting of the maximal face value accepted by the
machine for purchase performance .(0- unidentified).
➢
Maximal change. The function enables setting of the maximal change value, given by
the machine after purchase performance. (0- unidentified).
Example:
The operator sets the maximal change at 3,80 PLN for example. The customer inserts 10 PLN
and purchases a products for 1,20 PLN. The debt value is 8,80 PLN at present, but he cannot
receipt the change
– he must purchase further products until the debt will be less or equal to
the set value of 3,80 PLN. This helps to avoid money-changing in the machine.