Evend SOLID AS 6x10, Service Manual

Page: 16 / 41

Information
VENDING MACHINE
14
3. Lift the drawer so as to
disengage the wheels from
the guide.
The machine is designed to allow any configuration of the drawers’ orientation. In order to
change a height, the position of the guides, mounted on the side walls, should be changed
(ensure that the position of the left and the right guide respectively, is the same).
The bulkheads used for the engines support are placed on the back wall of the drawer. Thanks
to the perfect fit of the engines the additional mounting in not needed, simplifying assembly
and disassembly of the engines, respectively.
For the flat products and cans the additional slides facilitate sliding of the product.
For
performing the adjustment of the spring position, the slide should be unscrewed at first.
The failure to observe these rules can result in damage of the slide or the slide mounting.
1.9. Springs
The machine is equipped with the steel springs, galvanic coated for corrosion protection. The
selection of the springs spacing, to fit the product size, is possible. The springs can have 72
mm diameter with a stroke from 30mm to 80mm. For the big size products the double springs,
mounted on the motor with the double power transmission system, are installed. The springs
rotate in opposite direction (one to the right and one to the left).