Evend SOLID AS 6x10, Service Manual

Page: 20 / 41

Information
VENDING MACHINE
18
of the unit is necessary (see chapter 3.2). The vacuum cleaner or the compressed air should
be used for the impurity removal from the condenser.
The machine operator shall be responsible for the machine hygiene and maintenance. During
all cleaning operations any water sprays should be avoided and for safety reasons the machine
should be disconnected from the mains.
The following factors influence the machine service life:
➢
ambient temperature,
➢
temperature inside the chamber with products,
➢
machine location,
➢
kind of products,
➢
filling up frequency,
➢
usage culture.
1.13. Transport
The machine in transport shall not be:
➢
deflected,
➢
reversed,
➢
shaken,
➢
suspended on loops or ropes.
The forklift truck or pallet truck shall be used for the machine transport. Special care should be
taken during transport activities. The machine should be stored in a vertical position. Special
attention should be paid to all activities.
1.14. Additional equipment
The additional equipment includes the following:
➢
Sense & Talk. Speaking system. The system acts on a principle of move detection.
When the device detects a person presence (movement) near the machine, the sensor
will enable a music box and previously recorded sequence of sounds will be played.
The music box operating manual is supplied together with the machine.
➢
Hotspot. WLAN. Two router set can be installed in the machine. They provide an open
and public hotspot enabling use of Internet. The operating and configuration manual is
supplied together with the machine.
Wyświetlacze numerów i cen produktów.
➢
Products numbers and prices displays. The display system for the positions and prices
in the machine. When established in the VMC main board menu, the prices will be
automatically displayed on the displays below each position in the drawers of the
spring-operated machine. In the service mode starting
statistics
→
collectible
→
number of
products sold on the displays (green color) the number of the products sold, for a given
position, will be displayed.
This is a very co
nvenient and attractive system. It saves operator’s time and
considerably improves attractiveness of the automatic machine.