Evend SOLID AS 6x10, Service Manual

Page: 12 / 41

Information
VENDING MACHINE
10
Fig.5 Upper Bracket Spacer
Fig.4 Proper machine installation Fig.6 Lower Angle Bracket
The machine should be properly levelled. The lower machine feet should be used for that. The
real machine dimensions (door opened, easy access) should be taken into consideration in
planning distributor layout.
1.6. Power supply. Electric box.
The machine is supplied with the electric cable with plug for connection to 230V power network.
Before making the electricity connection we need to ensure that the socket the machine will
be connected to meets the standard requirements as well as verify the grounding integrity. An
annual verification is strictly recommended.
The supply connections inside the machine shall not be modified.
Supply indications
Brown Phase
Blue Neutral
Green-yellow Protective
Power consumption:
The measurement was performed at the ambient temperature maximum 30°C, the refrigerating
chamber temperature 10°C , the temperature of loaded products (with the machine empty)
less than the ambient temperature. The power consumption for one day (24 hours) is 6kWh
( for AS 6x8).