Evend SOLID AS 6x10, Service Manual

Page: 28 / 41

Main board./Automatic machine configuration
VENDING MACHINE
26
✓
Timing. In this mode the periods, in which the smell spraying devices operate
in the machine proximity, are established. Maximum 3 devices are at disposal.
The system operation periods cannot overlap.
•
Enable period. The parameter used for the device operation period setting. It is
equivalent to the smell intensity in the machine proximity. The longer smell spraying
period, the more intense smell.
•
PIR mode settings
✓
Smell #1. Activates the device connected to no.1 output on the VMC Sense &
Smell board.
✓
Smell #2. Activates the device connected to no.2 output on the VMC Sense &
Smell board.
✓
Smell #3. Activates the device connected to no.3 output on the VMC Sense &
Smell board.
✓
In sequence #1, #2. Activates in sequence the devices connected to no.1 and
no.2 outputs on the VMC Sense & Smell board.
✓
In sequence #1, #2, #3. Activates in sequence the devices connected to no.1,
no.2 and no.3 outputs on the VMC Sense & Smell board.
✓
Purchase mode settings
After this menu activation you will automatically access no 1 drawer selection,
if you want to select the smell to be sprayed after the purchase of goods from
tha
t drawer, the selection confirmation key „#” should be pressed and the
number of the device to operate should be selected (device number can be
changed with „1”, „2” keys). If you do not want to select any smell to be sprayed
for the particular drawer, the
cancel key „*” should be pressed. The access to
the next drawer will be performed automatically.
✓
Drawer #1
✓
Smell #1, #2, #3 the smell selection for no.1 drawer
✓
Drawer #2
✓
Smell #1, #2, #3 the smell selection for no.2 drawer
✓ ……..
✓
Drawer #7
✓
Smell #1, #2, #3 the smell selection for no.7 drawer
✓
For each drawer one of the smells can be selected (#1, #2, #3).
•
Timing mode settings
✓
Operation time for smell #1
✓
FROM: 08:00 TILL: 10:00
✓
Operation time for smell #2
✓
FROM: 11:00 TILL: 14:00
✓
Operation time for smell #3
✓
FROM: 15:00 TILL: 18:00
✓
!!! IMPORTANT !!! The Times cannot overlap.
•
PIR mode break. In case of the people presence in the machine proximity (PIR sensor
activated = continuous Sense & Smell system operation) a break in the system
operation can be established, to avoid the smell to become too intense and the smell
stock exhaustion performing too fast. That parameter can be used to establish the
system operation break for PIR mode, when the sensor is activated continuously.
•
Timing mode interval. Can be used for the system operation break setting, to avoid the
smell to become too intense and the smell stock exhaustion performing too fast. That
parameter can be used to establish the break operation time for the system in the timing
mode.
2.3.6. Communication