EVCO S.p.A.
Vcolor 679/689
| Installer manual ver. 1.0 | Code 144VC679E104
page
16
of
70
6
NAVIGATION
6.1
Initial information
Navigating the menus is intuitive, based on touch technology.
-
To enter into a procedure, touch the menu or the corresponding icon.
-
To exit a procedure and, in general, to return to the previous level, use the
keys.
-
To scroll up and down a menu, use the
and
keys
and
to skip to the next page.
-
To confirm the settings and/or changes, press the
key.
-
To start up a cycle, press
.
-
To interrupt a cycle, hold down
for a few seconds.
-
To silence the buzzer, touch the alarm bar while it is sounding. If the buzzer sounds for the end of an automatic cycle or because
the pre-cooling temperature has been reached, it will be automatically deactivated after the number of seconds set by parameter
E1 (unless it is silenced manually first).
6.2
Home screen
The Home screen is the departure point for navigating the user interface.
The Home screen displays the functions enabled, the date and the time.
Retarding-proofing (E12=1)
Proofing (E12=0)
All the end user’s selections start from the Home screen. The “interactive” keys grant access to the following functions:
RETARDING-PROOFING
PROOFING
FUNCTIONS
Select
and/or
change
and/or
save
automatic
retarding-proofing or proofing cycles in the recipe
book; start from the default recipe to select, set or
start up a complete cycle
x
Set and start up a manual cooling cycle
x
Set and start up a manual pre-cooling cycle
Set and start up a manual heating cycle
N.B.
: If the Home screen is displayed for longer than 10 minutes with no cycle running, it will automatically go back to the stand-by
page
.
