Eusso USS4500-E User Manual Download Page 62

Page: 62 / 75

USB

Detail

The Detail page shows the information of the connected USB devices:

USB Class:

The USB device type.

Manufacturer:

The manufacturer of the connected USB device

Device Name:

Name of the connected USB device.

USB 2.0/ 1.1:

The USB standard supported by the connected USB device.

Disk Setup

The Disk Setup page allows users to:
1.  Get information about the connected USB storage.
2.  Format the connected USB storage device.
3.  Mount the USB storage to the device.

USB Storage information

Name (1~16 characters):

Define a name for the USB storage device.

Note:

The name is also the folder name after

mounting the USB storage to the device. For more

information to mount the device, please see”

Mount/ Dismount Your USB Storage to the

Device

”

Description:

The partition order of the USB storage device.

Note:

1. The device recognizes the first four partitions of
your USB storage only. We recommend users not
to format the USB storage for more than 4

partitions.
2. The device support one connected USB storage

Summary of Contents for USS4500-E












































































Search results

Summary of Contents for USS4500-E

Reviews:

Related manuals for USS4500-E

Brands by name

Popular brands

Eusso USS4500-E, User Manual

Search results

Summary of Contents for USS4500-E

Reviews:

Related manuals for USS4500-E

Brands by name

Popular brands