Eurotherm 590A SERIES, Product Manual

Page: 3 / 109

WARNINGS AND INSTRUCTIONS
THESE WARNINGS AND INSTRUCTIONS ARE INCLUDED TO ENABLE THE USER TO OBTAIN THE
MAXIMUM EFFECTIVITY AND TO ALERT THE USER TO SAFETY ISSUES
NEVER WORK ON THE CONTROLLER, MOTOR, OR AUXILIARY EQUIPMENT WITHOUT
FIRST ISOLATING ALL SUPPLIES TO THE SYSTEM.
This is a product of the restricted sales distribution class according to iec 61800-3. In a domestic environment
this product may cause radio interference in which case the user may be required to take adequate measures.
This product is designated as ‘professional Equipment’ as defined in EN61000-3-2. Permission of the supply
authority shall be obtained before connection to the low voltage supply.
APPLICATION AREA: Industrial (non consumer) motor speed control utilising dc shunt machines.
PRODUCT MANUAL: The product manual is to provide a description of how the product works and is not intended
to describe how the apparatus works into which it may be installed.
This product manual is to be made available to all persons who are required to: design an application install and service
or any other associated operation with this product.
APPLICATION ADVICE: Applications advice and training is available from Eurotherm Drives Ltd.
INSTALLATION: Ensure that mechanically secure fixings are used as recommended.
ENSURE THAT THE ENCLOSURE INTO WHICH THIS PRODUCT IS MOUNTED IS SUITABLE FOR
THAT ENVIRONMENT (NOTE: THIS PRODUCT MAY BE IP00 OR IP20 AND HENCE REQUIRES
FURTHER PROTECTION TO AVOID PERSONAL INJURY).
Ensure that cooling and air flow around the product are as recommended.
Ensure that cables and wire terminations are as recommended and clamped to required torque.
Ensure that the installation and commissioning of this product are carried out by a component person.
Ensure that the product rating is not exceeded.
APPLICATION RISK: The integration of this product into other apparatus or system is not the responsibility
of Eurotherm Drives Ltd as to its applicability, effectivity or safety of operation or of other apparatus or systems.
Where appropriate the user should consider some aspects of the following risk assessment.
RISK ASSESSMENT: Under fault conditions or conditions not intended.
1. The motor speed may be incorrect. }In these situations the users own risk
2. The motor speed may be excessive }assessment should provide either
3. The direction of rotation may be incorrect. }sufficient guarding to prevent risk of
injury or additional redundant monitoring
and safety systems.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com