Eurotherm 590A SERIES, Product Manual

Page: 15 / 109

3 - 1
3. PRODUCT CODE
590A AND 591A THREE PHASE CONVERTERS
All members of the three phase product range can be fully specified using a digit numerical order code.
Block No No of Digits Function
1 4 Basic Product
2 4 Output Current
3 1 Supply Voltage (Power)
4 1 Supply Voltage (Auxiliary)
5 2 Special Builds
The 5 blocks are defined as follows:
Block 1:
4 Digits identifying the basic product.
590A: 3 phase, 4 Quadrant (regenerative) convertor 35A to 720A.
591A: 3 phase, 2 Quadrant (non-regenerative) convertor 35A to 720A.
598A: 3 phase, 4 Quadrant (regenerative) external stack controller.
599A: 3 phase, 2 Quadrant (non-regenerative) external stack controller.
Block 2: 4 digits identifying the DC output current rating.
590A/591A: The digits in this block represent a number between 000.0 and 999.9. To form the code from
the numbers, the decimal point is suppressed and leading zeros are added where necessary.
Examples: 234.5 Amps Code 2345
Conversely: Code 1234 123.4 Amps
598A/599A: 5 digits identifying the DC output current rating.
The digits in this block represent a number between 0000.0 and 2800.0. To form a code from
the numbers, the decimal point is suppressed and leading zeros are added where necessary
Examples: 1250 Amps Code 12500
Conversely: Code 11250 1125 Amps
Block 3: 1 Digit identifying the nominal 3 Phase AC power, supply Voltage.
0 110V
1 115V
2 208V
3 220V
4 240V
5 380V
6 415V
7 440V
8 460V
9 480V
A 500V
B 550V 598A/599A External Stacks only
C 600V 598A/599A External Stacks only
D 660V 598A/599A External Stacks only
Block 4: 1 Digit identifying the auxiliary AC control supply Voltage.
0
110V
1 115V
2
3
220V
4 240V
Block 5: 2
0
01 to 99 Digits identifying special option
No special options
Documented special options
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com