EURONORM JI150, Manual

Page: 15 / 28

Hub van Doorneweg 8 • 2171 KZ Sassenheim – NL • T +31(0)252 228850 • F +31(0)252 228235 • E sales@euronorm.nl • I euronormdrives.com Hub van Doorneweg 8 • 2171 KZ Sassenheim – NL • T +31(0)252 228850 • F +31(0)252 228235 • E sales@euronorm.nl • I euronormdrives.com 14 15
EURN010000_
002_C
EURN010000_
002_C
F4 group V/F control parameter group
Code Parameter name Setting range Factory setting Change
F4.00 V/F curve setting
0: Linear V/F;
1: Multi-point V/F;
2: Square V/F;
3: 1.2th power V/F;
4: 1.4th power V/F;
6: 1.6th power V/F;
8: 1.8th power V/F;
10: V/F completely separate;
11: V/F half separate
0
★
F4.01 Torque boost
0.0% (Automatic torque boost)
0.1~30%
0.0%
★
F4.02 Torque boost cut-off frequency 0.00Hz~F0.19 (Max. Frequency) 15.00Hz
★
F4.03 Multi-point V/F frequency point 1 0.00Hz~F4.05 0.00Hz
★
F4.04 Multi-point V/F voltage point V1 0.0%~100.0% 0.0%
★
F4.05 Multi-point V/F frequency point 2 F4.03~F4.07 0.00Hz ★
F4.06 Multi-point V/F voltage point V2 0.0%~100.0% 0.0%
★
F4.07 Multi-point V/F frequency point 3 F4.05~b0.04 (Motor rated frequency) 0.00Hz
★
F4.08 Multi-point V/F voltage point V3 0.0%~100.0% 0.0%
★
F4.09 V/F slip compensation gain 0.0%~200.0% 0.0% ☆
F4.10 V/F overexcitation gain 0~200 80
☆
F4.11 V/F oscillation suppression gain 0~100 0
☆
F4.12 V/F separation voltage source 0~9 0
☆
F4.13 V/F separation voltage digital setting 0V~motor rated voltage 0V ☆
F4.14 V/F separation voltage rise time 0.0s~1000.0s 0.0s
☆
F5 group Vector control parameter group
Code Parameter name Setting range Factory setting Change
F5.00 Proportion of speed loop G1 1 ~ 100 30
☆
F5.01 Speed loop integral T1 0.01s ~ 10.00s 0.50s
☆
F5.02 Switching frequency 1 0.00 ~ F5.05 5.00Hz
☆
F5.03 Proportion of speed loop G2 0 ~ 100 20
☆
F5.04 Speed loop integral T2 0.01s ~ 10.00s 1.00s
☆
F5.05 Switching frequency 2 F5.02 ~ F0.19(Max. frequency) 10.00Hz
☆
F5.06 Speed loop integral 0: Invalid; 1: Valid 0
☆
F5.07
Torque limit source under speed control
mode 0: Function code F5.08 set; 1: AI1 set;
5: Communication set
0
☆
F5.08 Torque upper limit digital setting 0.0% ~ 200.0% 150.0%
☆
F5.09 Vector control differential gain 50% ~ 200% 150%
☆
F5.10 Speed loop filtering time 0.000s ~ 0.100s 0.000s
☆
F5.11 Vector control overexcitation gain 0 ~ 200 64
☆
F5.12 Excitation regulator proportional gain 0 ~ 60000 2000
☆
F5.13 Excitation regulator integral gain 0 ~ 60000 1300
☆
F5.14 Torque regulator proportional gain 0 ~ 60000 2000
☆
F5.15 Torque regulator integral gain 0 ~ 60000 1300
☆