• Tighten the lid until the arrows on the lid locking indicators
(B)
are aligned as shown:
The O-ring may slightly compress to indicate a good seal.
b) Prepare Weather Station
The weather station can receive data transmitted from the outdoor sensor.
1
Insert batteries into the weather station
The weather station is powered by two AA type batteries (not included).
• Find the battery compartment
(21)
on the back of the weather
station. Remove the table stand if it is mounted on the
weather station.
• Open the battery compartment
(21)
and insert two type AA
batteries matching polarities as shown inside the battery
compartment
(21)
. Then close the battery compartment
(21)
.
After the batteries are inserted, the LCD display turns on and various information is
shown.
42
