• After removing the lid of the outdoor sensor, the outer O-ring
(J)
may come out of place and
rest on the top of the lower casing of the outdoor sensor as shown:
• Before closing the lid of the outdoor sensor, check:
- The inner
(I)
and outer
(J)
O-rings are well placed in the respective grooves of the lid.
- The inside of the sensor is completely dry. If needed, leave the casing open and allow any
water droplets to completely evaporate.
- When closing the lid of the outdoor sensor, make sure the outer O-ring
(J)
does not come
out of place.
41
