k) Connect to Multiple Sensors
The weather station can connect with up to 8 sensors (additional sensors sold separately).
1
Pairing with additional sensors
The weather station has eight channels and can pair with up to eight wireless sensors. To pair
with additional sensors, refer to the section “Installation” > Pairing”.
2
View data from multiple wireless sensors
• To view data transmitted from different wireless sensors, in normal time mode press the
button
(13)
repeatedly to switch data display from eight channels each.
• Press and hold the
button
(13)
for two seconds to automatically display data from
each channel in four-second interval. Press the
button
(13)
again to exit auto display
mode.
3
Synchronize time and date through DCF
This weather station can receive DCF time information from a separately-sold sensor (Item
No. 2144006). The sensor receives the RCC (radio controlled clock) signals which is used to
automatically synchronize the time and date.
The sensor automatically searches for the signal daily at 02:00 and 17:00 o’clock.
Enable or disable RCC signal reception on the weather station by:
• In normal time mode, press and hold the
button
(15)
for two seconds until “24” or “12”
appear and flash on the display. The weather station is now in setting mode.
• Press the
button
(15)
until the DCF signal symbol
(12)
shows, and “ON” or “OFF”
flashes on the display. The weather station is now in DCF setting mode.
• Press the or
button (14) or
(13)
to select “ON” or “OFF”, then press the
button
(15)
to confirm the DCF setting.
- If “ON” is selected, DCF signal reception is turned on.
- If “OFF” is selected, DCF signal reception is turned off.
• If the weather station has received the DCF signal, the reception indicator stays in a bright
and solid state. If the DCF signal reception fails, the reception indicator
stays in grey
colour. If the DCF signal is being received, the reception indicator
flashes.
4
DST ON/OFF
DST (daylight saving time) function is only available when the weather station is paired with a
compatible DCF sensor. To activate or deactivate DST function on the weather station, follow the
procedure similar to the DCF function setting.
51
