Euroalpi Pasubio, Use And Maintenance Manual

Page: 16 / 45

16
9.4 Meaning of the LED
Led Meaning when turn on Icon
CHRONO Chrono enabled
ALARM Stove on the alert
IGNITION Ignition on
AUGER Auger in motion
FUMES ASPIRATOR Fumes aspirator on
EXCHANGER-PUMP Exchanger \ pump on
NOT USED Not used
9.5 Display
10 MODES OF OPERATION
Premise
The installer must make the first start by taking precautions, and must ensure that the safeties are working
properly (pressure switch, hopper temperature protection etc...). Any anomalies with the installation can
not be attributed directly to the ZF company. The installer must carry out any other try he deems
necessary and verify the operation of the buttons on the console
.
10.1 Igniting the stove
Once the installation of the stove and the compulsory verification of the safeties are over, the operation
phase begins. To power the stove, simply connect the cable to the electrical outlet, press the power switch
located on the back of the stove at the bottom, moving from position 0 to position 1 as shown in
(Figure
1).
Figure 1
Display Function Conditions Visualization
DISPLAY
Power
state
parameter
name
OFF OFF+ROOM TEMPWORK POWER+HOUR
ON ON+ ROOM TEMPWORK POWER+HOUR
LOAD FED ROOM TEMPWORK POWER+HOUR
WORK ROOM TEMPWORK POWER+HOUR
PROGRAMMATION SELECTED PARAMETER