EUCHNER 167948 Operating Instructions Manual Download Page 4

Page: 4 / 40

Operating Instructions

Key Adapter CKS2-K-BP/BR-CC-FLX

(translation of the original operating instructions) MAN20001512-01-03/22

1. About this document

1.1. Scope

These operating instructions apply to all CKS2-K-BP/BR-CC-FLX of version 1.0.X. These operating instructions, the document

Safety information

and any enclosed data sheet form the complete user information for your device.

1.2. Target group

Design engineers and installation planners for safety devices on machines, as well as setup and servicing staff possessing

special expertise in handling safety components.

1.3. Key to symbols

Symbol/depiction

Meaning

Printed document

www

Document is available for download at www.euchner.com

DANGER

WARNING

CAUTION

Safety precautions

Danger

of death or severe injuries

Warning

about possible injuries

Caution

slight injuries possible

NOTICE

Important!

Notice

about possible device damage

Important

information

Tip

Useful information

1.4. Supplementary documents

The overall documentation for this device consists of the following documents:

Document title

(document number)

Contents

Safety information

(2525460)

Basic safety information

Operating instructions

(MAN20001512)

(this document)

www

Declaration of conformity

www

Possibly a data sheet

Item-specific information about deviations or additions

www

Important!

Always read all documents to gain a complete overview of safe installation, setup and use of the device.

The documents can be downloaded from www.euchner.com. For this purpose enter the doc. no. or

the order number for the device in the search box.

Summary of Contents for 167948









































Search results

Summary of Contents for 167948

Reviews:

Related manuals for 167948

Brands by name

Popular brands

EUCHNER 167948, Operating Instructions Manual

Search results

Summary of Contents for 167948

Reviews:

Related manuals for 167948

Brands by name

Popular brands