EUCHNER 167948, Operating Instructions Manual

Page: 34 / 40

Operating Instructions
Key Adapter CKS2-K-BP/BR-CC-FLX
34
(translation of the original operating instructions) MAN20001512-01-03/22
15. Technical data
NOTICE
If a data sheet is included with the product, the information on the data sheet applies.
15.1. Technical data for key adapter CKS2-K-BP/BR-CC-FLX
Parameter Value Unit
min. typ. max.
Housing material Plastic PA6-GF30 black
Dimensions 75 x 40 x 73 mm
Weight (device without connecting cable) 0.08 kg
Ambient temperature at U
B
= 24 V DC -25 - +55
°C
Storage temperature -25 - +70
Degree of protection IP65/IP67 in installed state
Safety class III
Degree of contamination 2
Installation orientation On the front
Mounting cut-out acc. to DIN IEC 61554 33 x 68 mm
Connection Connecting cable 15 cm (static bending radius 25 mm) with
CKS2-BP: plug connector M12, 5-pin
CKS2-BR: plug connector M12, 8-pin
Operating voltage U
B
24 -15 / +20%, regulated, residual ripple < 5%) (PELV) V DC
Current consumption 40 mA
External fuse
(operating voltage)
0.25 - 8 A
Safety outputs FO1A/FO1B Semiconductor outputs, p-switching, short circuit-proof
- Output voltage U
FO1A
/U
FO1B
1)
HIGH U
FO1A
U
B
-4 - U
B
V DC HIGH U
FO1B
LOW U
FO1A
/U
FO1B
0 1
Switching current per safety output 1 - 150 mA
Utilization category acc. to EN IEC 60947-5-2 DC-13 24 V 150 mA
Caution: Outputs must be protected by a free-wheeling diode in the case of inductive loads.
Off-state current I
r
≤ 0.25 mA
Door position monitoring output OD/C 1) p-switching, short circuit-proof
- Output voltage
HIGH
U
B
-1.5 - U
B
V DC
LOW 0 - 1
- Switching current 1 - 50 mA
Rated insulation voltage U
i
- - 300 V
Rated impulse withstand voltage U
imp
- - 1.5 kV
Conditional short-circuit current 100 A
Shock and vibration resistance Acc. to EN IEC 60947-5-3
EMC protection requirements Acc. to EN IEC 60947-5-3
Ready delay
-
CKS2-BP: 2
CKS2-BR: 5
- s
Risk time for single device - - 125 ms
Risk time extension per device in series connection - - 10 ms
Reaction time
2)
27.4 ms
Reaction time extension per device in series connection 6.7 ms
Turn-on time - - 400 ms
Discrepancy time - - 10 ms
Test pulse duration 0.3 ms
Test pulse interval Approx. 100 ms
Reliability values acc. to EN ISO 13849-1 3)
Category 4
Performance Level PL e
PFH
D
6 x 10 -10 / h
Mission time 20 years
Reliability values acc. to EN 62061:2005/A2:2015 SILCL3
1) Values at a switching current of 50 mA without taking into account the cable lengths.
2) The reaction time is the time until the moment when at least one of the outputs (FO1A or FO1B) switches off when the key is removed from the actuating range, given compliance with all manufacturer’s
specifications.
3) Refer to the declaration of conformity in chapter 18 for the issue date.