ETS-Lindgren HI-6006, User Manual, Page: 58 / 92

58
Probe Error Output
If an error occurs, the probe will respond with one of the following strings.
These strings begin with a colon and end with a carriage return.
E1 Communication error (for example, overflow)
E2 Buffer full error; too many characters
contained between the start character and
carriage return sequence
E3 Received command is invalid
E4 Received parameter is invalid
E5 Hardware error (for example, EEPROM
failure)
E6 Parity error
E7 Probe commands are not available unless
the probe is powered on. To power on the
probe, send the Laser ON command, r.
E9 Received command is invalid