ETS-Lindgren HI-6006, User Manual, Page: 55 / 92

55 54
Note: <Null><CR> is a
special command that
can be used as the
initial command to
the probe after it is
turned on.
Note: The BP
command is provided
for backward
compatibility and
should not be used to
monitor the converter
voltage, which
always responds with
:B64N<CR>.
Probe Command Description Probe Response
TC Read temperature in Centigrade :Txxxx.<CR>
TF Read temperature in Fahrenheit :Txxxx.<CR>
<Null><CR> Send the ASCII null character :N<CR>
HI-60XX Series Field Probes
Probe Command Description Probe Response
B<CR> Read battery voltage :Bxx.xx<CR>
• :B04.80
=100% of charge
=4.8 volts
• :B04.00
=0% of charge
=4.0 volts
BP Read battery capacity in
percentage Bxx<N or F><CR>
• :B64N
=100% of charge
=4.8 volts
• :B00F
=0% of charge
=4.0 volts
• N=safe operating level
• F=fail level
Percentage reported in
hexadecimal, 0% to 64%
D3 Read probe data :Dx.xxxyy.yyzzz.zB<CR>
• xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
• B=battery flag, N or F