ETNA FIV760RVS, Instructions For Use Manual

Page: 60 / 72

EN 26
Warning!
Disconnect the appliance from the power supply before carrying out
any repairs or cleaning. Preferably unplug the appliance, switch off the
fuses, or set the switch in the meter cupboard to zero.
Do not use steam cleaners or high-pressure steam cleaners
to clean the appliance.
Cleaning the oven
Front of the unit
Clean the surface with a liquid, non-abrasive cleaner for smooth
surfaces and a soft cloth. Apply the cleaning product to the cloth and
wipe away the dirt; then rinse with water. Do not apply the cleaning
product directly onto the surface. Do not use harsh or abrasive
detergents, sharp objects or steel wool, as this can cause scratches
on the unit.
Aluminium surfaces
Aluminium surfaces should be cleaned with non-abrasive, liquid
cleaning products designed for such materials. Apply the cleaning
product to a damp cloth and wipe the surface clean; then rinse the
surface with water. Do not apply the cleaning product directly onto the
aluminium surface. Do not use abrasive detergents or scourers. The
surface must not come into contact with oven sprays.
Stainless steel front panels
Clean the surface with a mild detergent (soapsuds) and a soft sponge
that does not scratch the surface. Do not use abrasive or solvent-
based detergents. If you do not follow these instructions the casing
may become damaged.
Varnished and plastic surfaces
Clean the knobs/buttons and door handle with a soft cloth and liquid
cleaning agent suitable for cleaning smooth, varnished surfaces. You
can also use cleaning agents specifically designed for this type of
surface. In this case, follow the instructions of the manufacturer.
MAINTENANCE