For Support Contact +46 8 25 28 75, [email protected] or +61 2 9956 7377, [email protected]
ET-IS?
Get the current Socket status
ET-ISO or
ET-ISO=IP1
Perform an ActiveOpen and establish a Socket
Connect to an ISP if not connected.
ET-I&IP
Get network connection status profile
ET-IAPN1
Set APN
ET-I&LIP
Get local IP address
Other commands
COMMAND
ACTION
RESPONSE/NOTES
ETSWT=n,hh:mm,p
Set wakeup timer for each task
N=task number (max 5), hh = wakeup hour, mm =
wakeup minute, p = periodicity (min)
ETSWT?
Show wakeup timers and tasks
ETSUI=xxx
Set User ID
Max 40 characters
ETSC1
Set communication direction
0 = shutdown com device (low power mode)
1 = open communication Modem<->PC
ETLPP
Low power mode period time
ETLPP=0,0
– Low power mode is off
ETLPP=1,10 Wake up on the SWT 5 timer and stay
awake min 10 min
ET&V
Show active profile
ET&W
Save active profile
ET&BSL
Enter into Boot Strap Loader
ET&MB
Jump from main program to boot program
ETE0
Echo On/Off
0=Off, 1=On
ETP0
Print Info Response
0=Off, 1=On
ETPR0
Print Result
0=Off, 1=On
ETPM0
Print Message
0=Off, 1=On
ETRSL
Run Check signal level 255 times or until "ESC"
key is pressed
