For Support Contact +46 8 25 28 75, [email protected] or +61 2 9956 7377, [email protected]
HW Model No - HW Serial No
Here the model number and serial number for the unit are shown.
Init AT/ET-Command Table
Here you may set various AT and/or ET commands that are executed at power up.
Alarm messages
•
"Append Alarm status" allows you to choose whether or not to add the status (High or Low)
to the alert message. This is enabled by default.
•
"Append Unit ID" allows you to choose whether or not to add the Unit ID to the alert
message.
Real Time Clock Sync
Select how the RTC is synchronized. Automatically sync it to EWO or use NTP Servers. Real
Time Clock sync with NTP servers will occur at start-up and every 12 hours.
The unit is using the NIST time information to adjust for time zone and daylight saving if
“sync in local time” is used. This may not work in all parts of the world and depends on the
telecom operator.
Note: Do not use NTP clock sync with EWO.
