27
Paradigm Architectural Control Processor Configuration Manual
sACN Control
•
sACN Sources - total number of sACN sources the processor or system must listen to,
by way of its input patch and gateway functionality. This number changes dynamically
during runtime, as several sources may exist for a single universe.
•
sACN Universes - sACN universes are the total number of sACN universes being used,
both for input and output. The input and output may be the same or different depending
on the system setup.
•
sACN Addresses - sACN addresses are the total number of patched sACN addresses,
both for input and output. The input and output addresses may be the same or different,
when they are different they are cumulative. For example, when the input patch is 10
addresses and the output patch is 10 different addresses, this is displayed as 20.
Change the sACN statistics displayed from either “System” view, which is default, or a
narrowed “Processor” view.
When viewing by “Processor”, you may narrow statistics even more by selecting a specific
processor from the processors configured in the system.
Ethernet Interface
LON Interface
sACN Control Stats
Totals by:
Processor
for:
Processor 1
sACN Sources:
6
sACN Universes
3
sACN Addresses
499
“sACN Control Stats” provide users a metric for
resource strain caused by Ethernet based control
using sACN and helps to characterize the sACN
environment for a system. sACN control statistics
update every 5 seconds.
Name:
Processor
1
IP:
10.101.10.101
Mask:
255.255.0.0
GWay:
10.101.1.1
Config:
Manual
DHCP Server:
###.###.###.###
DNS Server:
###.###.###.###
Mac
00:11:22:33:44:55
Pkts TX:
#######
Pkts RX:
#######
Late pkts: #####
Collisions: #####
Jabber pkts:
#####
Runt pkts:
#####
Giant pkts:
#####
Ethernet Interface
“Ethernet Interface” menu includes statistics relating to the
Ethernet connectivity to the Paradigm system. Manual, DHCP,
or Link Local IP configuration were determined when the
LightDesigner project configuration was created, using the New
Project Wizard.
The DHCP and DNS Server data displays with the valid IP
address. When no valid IP is available, “None” displays.
LON Interface Stats
Local NID:
####.####.####
Used Domaine:
x, y
Used Subnets:
w, z
Pkts TX:
####
Pkts RX:
####
TX Retries:
####
Collisions: ####
Late Acks:
####
No Acks:
####
RX Error:
####
Buff Overrun:
####
“LON Interface” menu includes statistics related to the LON
network.
