3
Programming
46
alternative setting, 24 Hour, by pressing enter (
). This toggles the selection
between the two formats.
Step 5:
Change the time to reflect the current time. Time settings stay with the ACP not
the configuration file.
a: Scroll to “Time” selection in the menu list and press enter (
). The selection
changes to the first field. The time style selected in step 4 is also reflected in
the time fields.
b: Scroll to select the desired hour value or use the button pad to specify a
numeric value. Press enter (
) to move the selection to the minutes time
field.
c: Repeat for the minutes time field. Press enter (
). If the time style is set to
“12 Hour” clock, the selection moves to the “am” or “pm” field. Use the scroll
wheel to make the selection.
Step 6:
Change the time zone for accurate time when timed events are scheduled. This
setting is contained in the architectural configuration.
a: Scroll to “Time Zone” selection in the menu list and press enter (
). Select
the proper “Time Zone” based on hours offset from GMT (Greenwich Mean
Time) and press enter. Visit
http://wwp.greenwichmeantime.com/
for a
complete listing of GMT time zones. The selection moves back to the “Time
Zone” menu list.
Step 7:
Change “Latitude” and “Longitude” to set your accurate location. By default,
latitude is set directionally North, although you may change the selection to
South as required. By default, longitude is set directionally West, although you
may change the selection to East as required. This setting is contained in the
architectural configuration.
a: Scroll to “Latitude” selection in the menu list and press enter (
).
b: Scroll to select the desired angle (degrees), minutes, and direction (N or S),
pressing enter (
) for each.
c: Proceed with setting Longitude in the same manner as you have set
Latitude.
Step 8:
Change the “DST” (daylight saving time) so the system retains the correct time.
This value defaults to “US Dates” but can be changed to “EU Dates”, “Manual
Dates”, or “Not Observed”. This setting is contained in the architectural
configuration.
a: Scroll to “DST” selection in the menu list and press enter (
). The selection
toggles to the next option in the list.
b: Continue pressing enter (
) until you reach the desired setting. If “Manual
Dates” is selected, continue to step 9, otherwise skip step 9.
Step 9:
Set “Manual DST Dates” displays in the menu list only when the daylight saving
time setting is set to “Manual Dates”. This settings allows you to manually change
the DST start and end dates.This setting is contained in the architectural
configuration.
a: Scroll to “Manual DST Dates” in the menu list and press enter (
). The
current DST start and end dates are displayed in the “Manual DST Dates”
menu along with “Set Manual DST Dates” selection.
b: Press enter (
) to set manual dates. The menu list displays the DST Start
Date month, day of week, and week of month for user selection. The menu
list also displays the DST End Date month, day of week, and week of month
for user selection.
•
month and day of week are selected by pressing the enter (
) button and
