65
Paradigm Architectural Control Processor Configuration Manual
returns to the “File Operations” menu when the save action is complete.
•
If a file with the same name is already saved to the root directory of the
selected media, a dialog displays for action. Select “Yes” to overwrite the
existing file or select “No” to cancel the save action and return to the “Save
Log Files” menu list.
•
If the destination media is full, has errors, or is write protected, follow the
instructions on the error dialog. The menu returns to the “Save Log Files”
menu list.
View/Clear Errors Menu
Some errors can be cleared from the list or are automatically cleared.
Scroll to the displayed error and press enter (
) to remove it from the errors list. Some
errors automatically clear themselves from the list when the condition that created the error
no longer exists. Errors that are still current will quickly reappear in the list.
Archive Mismatch Warning
Archive mismatch warnings occur only in multi-processor systems when a configuration
update (such as a preset record, or edit to a timed event) was not properly received by all
of the processors.
There are two ways to resolve a mismatch:
•
1) Press enter (
) when viewing the error to clear the mismatch.
•
2) Uploading a configuration from LightDesigner will resolve any mismatch.
N o t e :
Reference
“Status / Error Messages”, page 19
, for a list of most common errors
and the resulting actions.
View / Clear Errors
Dimmer Errors
Overtemp: Dim 13
Rack Communication
Failure
DMX A input Inactive
Preset 5 Mismatch
Processor 2
The “View/Clear Errors” menu list displays current
system errors in the order of severity, with the most
severe error first in the list. When duplicated or new
errors are detected, they replace any previous errors
of the same type in the list.
View/Clear Errors
Dimmer Errors:
Overtemp: Dim 13
Can not be cleared!
OK
Other errors cannot be cleared from the list.
Some errors do not support clearing. You will receive
notification on the display when this condition exists. Scroll to
select “Ok” and press enter (
).